Electra Ink Studio

   Sequencing made easy

Copyright © 2009 Electra Ink Studio - All Rights Reserved

I would like to offer FREE Sequences for Xlights, and Light O Rama. I have a Pro License for Light O Rama v5. I have a few Light O Rama Sequences that I have done, I'm still learning Xlights, but I still have a few Xlights sequences that I can share that I have made. I will try to include location of the audio files, Shader file, and everything used to make.

Ridge Line=150 smart pixels

Eves        =150 smart pixels

Railing     =150 smart pixels

Windows  =150 smart pixels each

Stars 2     =150 smart pixels each

Mega tree is a 5ft 180 tree, with 16 channels of 100 pixels each. 1 fold to get it 32 channels.

 

Mini Trees 8ea. including the star.

150 smart pixels, 130 for the tree, and the last 20 are for the stars.

 

Inside arches=4 channels 50 pixel ribbons ea. From Light O Rama.

 

4 3 level Arches from Boscoyo Studios 42 smart Pixels per level.

 

18X28 Metrix= 6 rolls 76 nodes ea.

Ridge Line=200 smart pixels

Eves        =630 smart Icicles pixels 2 channels

Railing     =200 smart pixels

Windows  =150 smart Ribbon's each

Stars 2     =150 smart pixels each (2 Layer)

Mega tree is a 10ft 180deg tree, with 12 channels of 200 pixels each. 1 fold to get it 36channels.

Mini Trees 8ea. including the star.

150 smart pixels, 150 for the tree, and the last 50 are for the stars.

small arches=1 channel 25 pixel ribbons ea. From Light O Rama.

4 3 level Arches from EFL Studios 50 smart Pixels per level.

18X28 Metrix= 2 channels 228 nodes ea.

The Tune To Sign from Boscoyo has :

60 nodes for the border:

67 nodes for the Tune To:

360 nodes for the Matrix:

12 2 layer Snowflakes 150 pixels ea.

12 Pixel Poles 300 pixels ea. 2 per prop. 2 channels ea.

3 Singing Trees nb3D Printed

3 Singing Bulbs 3D Printed

3X4 P5 Panel From Wired Watts for Video

4 EFL Fans150 Pixels ea.

House Layout

This is my House layout.

Site Adjective

2021 All 244,908  Smart Pixels

If your just starting out, sequences looks very confusing! doesn't matter if its Light O Rama, or Xlights. Its not as hard as it looks. Both systems have good Help Forums, that helps you solve any problems.

 

I have ran LOR for the last 5 years, this year I switched to Xlights, and I'm really enjoying the switch. once you get past the learning stage, your find the sequencing is a lot of fun no matter what system you are using

Equipment I currently have are.

 

  2 Falcon F16v3 controllers

  3 Falcon F16v4 controller

  Raspberry Pi 4b to run the show, and the

  P5 Panel

  and 244,908 Pixels so far!

     

So you want to make a light show. 1st off there is a lot of work to do. Its not cheap. If you build your own controller you can save some money. A ready to run controller will run between $400 to $500. You can, but a Falcon F16v4 board for just over $275. A power supply will be $25 to $30. A case is around $30 to $50. Then you just need to get the dongle connectors for your pixels.

The hardest part is putting together the props/models depending on which software your using. pushing the pixels in. there all kinds of props you can buy, or make your own. Look under the Tools Menu to see where to get them. Learning the software is actually the easiest part once you get past the learning stage.  So have fun! And remember there is always people that will help you. Or look on YouTube. With Xlights there is the Zoom Room! there is always someone there to help.